|
KatDemo Index
Kat's Demo - 01-30-05 Dichornic
You are in "*g.CITY-o-Clay:1"
( )
hlynn1975: Karen is great!
Tammy: oh ok tyvm
Missy~VA: ok what is she doin now?
bonsaikathy: I'll bet Heather
Marlea in PA: hi vicki
Missy~VA: hiya vicki
bonsaikathy: Hi Vicki
Donna_in_NV: conditioning more black clay - probably for dam around
leaf
Missy~VA: what are u doin now kat?
krafteame: Im lost what thickness should black clay for bakc be rolled
out
to???
Kat Indpls IN: long strip number 1 setting of black clay for the edge
bonsaikathy: thickest setting
Shargoose=Sharon V in TN: On thikest setting
Electron Forge: and the dam would be for...?
Vicki in NH: hi
Donna_in_NV: cut a strip to go around the leaf
Donna_in_NV: to hold in the utee
Marlea in PA: the thickest setting on your machine, mine is 8
Electron Forge: oh yeah, forgot about that stuff
Kat Indpls IN: tall enough for both layers of clay and a wall to catch
the
utee
bonsaikathy: is the utee the embossing powder
Marlea in PA: yesm ultra thick embossing powder
Donna_in_NV: yes, Ultra Thick Embossing Enamel
krafteame: now cut the back the same shape right??
Marlea in PA: enamel, lol
Donna_in_NV: yes
Lisa in Maine: does liquid clay work sort of the same way?
bonsaikathy: no Lisa
bonsaikathy: not clear enough
Kat Indpls IN: now this is where i get real anal because seams bug me
Shargoose=Sharon V in TN: LOL
bonsaikathy: the embossing powder is awesome
Marlea in PA: i have liquid glass here...do I use it basically the same
way?
Lisa in Maine: darn ... and I just got some of that!
bonsaikathy: they do me too Kat
Donna_in_NV: they bug me too - can spoil an otherwise beautiful piece
Kat Indpls IN: okay to thick or tall
Electron Forge: so is the dam part of the final piece or is it removed
after
the utee?
bonsaikathy: part of
Electron Forge: ty again
Donna_in_NV: I think it stays on to protect edges of UTEE
Donna_in_NV: it can be fragile
Tammy: ok whats this?
Missy~VA: what is that kat?
Alix (alixnc) joined the room
Electron Forge: hi Alix
Donna_in_NV: wb Alix
Missy~VA: hi alix
Marlea in PA: hi alix
Kat Indpls IN: tool from poly tools i use to make tile bracelets but
makes a
great straight edge
krafteame: did you roll the front (foil piece ) with the black back
piece
thru the pm ?
Alix: HIYA ... PHEW ... FINALLY GOT HERE
Shargoose=Sharon V in TN: No rolling
Shargoose=Sharon V in TN: Used a brayer
Tammy: oh ok ty
Donna_in_NV: that's an interesting tool
Donna_in_NV: I like the wood handle on it
Electron Forge: I don't get how the tool works
Lisa in Maine: ok ... "newbie" question ... does the UTEE give the clay
a
kind of "glassy" surface?
Donna_in_NV: about how much taller should the strip be than the 2
layers of
clay - about an eighth of an inch?
bonsaikathy: yes
Kat Indpls IN: i use a needle to press the edging onto the sides, this
is
very important
bonsaikathy: very glassy looking
Donna_in_NV: Doug, she's using it as a straight edge for cutting the
long
strip
krafteame: ok kat couldyou please recap what you have done so far real
quick
because Im stuck Im sorry
Lisa in Maine: ok ... thanks Kathy ... guess I gotta find some place
that
sells it, huh??
Kat Indpls IN: i have 1/4 " on this one
Electron Forge: I'm a guy, I need a manual!! ok didn't think it was
that
simple lol
bonsaikathy: walmart, scrapbooking stores
bonsaikathy: check the scrapbooking dept
Shargoose=Sharon V in TN: We are saving logs and photos Kraftame
hlynn1975: Lisa, any plase that sells scrapbooking supplies or stamping
supplies should have ti
Donna_in_NV: 1/4" taller than the 2 layers of black clay?
hlynn1975: brb, taking pics of some pins I just finished
Lisa in Maine: not MY Wal-Mart ... it's a crappy store! Bleh! LOL
Thanks to
both of you ... I'll loook around
Donna_in_NV: using needle tool to press the edges of the strip to the
leaf
bonsaikathy: Michaels too
Lisa in Maine: guess I'm gonna hafta have YOU look around for it,
mother!
Donna_in_NV: looks like put another ceramic tile over it to level the
dam
Alix: kAT CAN YOU TUR IT AROUND JUST FOR A SEC SO WE CAN SEE HOW NEEDLE
IS
APLIE4D?
Shargoose=Sharon V in TN: Kat one quick close up of leaf please
bonsaikathy: oh great shot
Lisa in Maine: very very pretty, Kat!!
Donna_in_NV: awesome
bonsaikathy: very pretty
Shargoose=Sharon V in TN: Thanks
mommaclara2001: That is so pretty.
Alix: Sorry about caps
bonsaikathy: the light was on it perfect
Shargoose=Sharon V in TN: I didn't make mine deep enough!!
Electron Forge: that's pretty cool
Kat Indpls IN: roll all around to seal to both layers of clay
Donna_in_NV: Lisa, Kat said you can use regular clear embossing powder
-
just needs more
Shargoose=Sharon V in TN:
Kat Indpls IN: 1/8 " should be fine i put alot in and this one is
higher
then normal
Alix: So your'e just simply pressing the side of the needle against the
polyclay?
Lisa in Maine: ok Donna ... thanks!
xtinepc left the room
anniek556: x
Kat Indpls IN: yes regular enamel is fine
Shargoose=Sharon V in TN: Whew!! Good
Shargoose=Sharon V in TN: Mine's about 1/8 in
bonsaikathy: Sharon good idea to do another roll call
bonsaikathy: Kathy in E. TN
countrylady100ca: Sonya, Alberta, Canada
Donna_in_NV: sunny today in Silver Springs
mommaclara2001: Clara,WV
Esther_UK: <-- Coventry
connie_flying: Connie -- Reno NV
Marlea in PA: <---me
Alix: Alix in traction (I wish)
Missy~VA: <~~~~me
Electron Forge: Douglas>>>>Kansas
Tammy: <~~~~~in Idaho
Lisa in Maine: <--- me!
krafteame: Lisa T Salisbury NC
Lisa in Maine: it was beautiful today! Took the boys out to play in the
snow
... they had a ball!
MountainMaMaDuke: Pauline (MMD) Marlow NH
Shargoose=Sharon V in TN: Sharon V in TN
Donna_in_NV: smoothing top edge - put another tile over top
Kat Indpls IN: the mroe time i take with this now the less i have to
sand
Kat Indpls IN: and i hate to sand
Donna_in_NV: took it off again - Kat, is 2nd tile to level the top of
the
edging
Electron Forge: me too!
bonsaikathy: exactly and that's why I smooth as well as I can prior to
baking
Lisa in Maine: can the UTEE be sanded as well?
Alix: Kat ... you use a rotary sander?
Donna_in_NV: not unless you want the UTEE all scratched
Electron Forge: good question Lisa!
Lisa in Maine: I've never used it Donna, so I don't know what it does
...
that's why I'm asking ... I kinda thought it WOULD scratch, but ... LOL
Kat Indpls IN: no by hand
bonsaikathy: probably can be polished but I doubt sanded
Kat Indpls IN: okay time for the utee then into my oven now i do tons
of
utee
Kat Indpls IN: never sand the utee only the clay areas
Donna_in_NV: buff the UTEE with very soft cloth, do not sand
Lisa in Maine: do you use the UTEE before you cure the piece (i.e. cure
with
it on) or do you put it on once it's cured?
bonsaikathy: before curing
pennyi (pennyi@ameritech.net)
joined the room
Lisa in Maine: ok thanks
bonsaikathy: it bakes on very well
Marlea in PA: hi penny
Electron Forge: HI Penny
bonsaikathy: HI Penny
mommaclara2001: Hi Penny
pennyi: hi
bernie: hi penny
Donna_in_NV: putting UTEE on piece now - leveling it out with spoon
Lisa in Maine: is that what she's got in the jar?
Marlea in PA: the utee
bonsaikathy: yes
Donna_in_NV: yes, Lisa
Electron Forge: I guess I expected it to be a liquid for some reason
Alix: BRB food in ovenm
Lisa in Maine: LOL ... thanks ... I was a little pre-emptive wih the
question
Donna_in_NV: No, it's a granular powder
anniek556: dummy me doesnt know what utee is or what its going to do
Donna_in_NV: removing utee from edges
Lisa in Maine: I was expecting a liquid, too , George
Electron Forge: <<Doug
bonsaikathy: no, embossing powder is granular and when it gets heated
it
turns clear and smooth if you're using the clear
Kat Indpls IN: okay i'm going to put this in the oven brb
Donna_in_NV: I know about embossing powders from stamping
Lisa in Maine: Sorry ... I knew that ... trying to type and watch the
camera
at the same time ..
MountainMaMaDuke: Annie: There is no such thing as a "dummy thing or
question" - that is how we all learn!
Donna_in_NV: looks like she filled it with UTEE not quite to top edge
of dam
Electron Forge: NP.
Lisa in Maine: shouldn't be trying to "multi-task", I guess!
anniek556: ok so what is it
anniek556: please
Electron Forge: Can you get the utee to thick? If so does it become
cloudy?
Donna_in_NV: It's going to be a faux dichroic leaf shaped pendant
Esther_UK: I#m cutting out a bodice as well as watching so you arn't
only
one multitasking
Kat Indpls IN: the thicker the more depth to it
Missy~VA: how long do we bake now?
Marlea in PA: the white utee will melt and become glassy annie, at
least i
believe so
Lisa in Maine: I take it, you bake it for the same length of time you
would
your clay, right?
Donna_in_NV: I've never had clear embossing powder cloud up
bonsaikathy: I don't know for sure Doug, but I think probably not
Electron Forge: it's an embossing powder, but a thicker one, that when
cured
will become clear and protect the piece
Marlea in PA: actually clear but looks white, ol'
Kat Indpls IN: okay this one i did the other day but haven't put a
sealer on
it yet
anniek556: ok thanks marlea
Missy~VA: how long do we bake now?
MountainMaMaDuke: UTEE is an embossing powder, after it is baked, it
will
turn clear and give the item a thick clear shine!
anniek556: ok so utee makes it look like a glass covering
Donna_in_NV: like a layer of glass
Marlea in PA: exactly annie
anniek556: cool
Kat Indpls IN: utee scratches easy i use fimo glaze over the top to
protect
Lisa in Maine: can you use Future polish too?
Donna_in_NV: where do you get the fimo glaze?
Kat Indpls IN: i don't use future it turns yellow
bonsaikathy: you know it must be the difference in brands then Kat
because
I've been using clear embossing powder and even tried to scratch it and
it
didn't
bonsaikathy: that's interesting
Kat Indpls IN: i get it at Prizm Art Supply but any place that sells
fimo
sells the glaze
Lisa in Maine: really?? now that's what I've heard everyone using to
seal
their pieces, so I went out and got a bottle of it! drat!
Donna_in_NV: It may be the diff between reg embossing powder and UTEE
or do
you use UTEE
Electron Forge: which is done after curing and polishing the clay ( not
the
utee as it will scratch ) right? does it need to be oven cured?
bonsaikathy: no
Shargoose=Sharon V in TN: BRB
Kat Indpls IN: i also have to protect this foil leafing pen edge
another
reason to glaze
Shargoose=Sharon V in TN: MESS
Shargoose=Sharon V in TN: I have convection oven
Shargoose=Sharon V in TN: UTEE all over it now
Kat Indpls IN: no fimo glaze does not get oven cured
Electron Forge: 10-4
Donna_in_NV: ty
countrylady100ca: Good One Doug LOL
Marlea in PA: oh no sharon
bonsaikathy: ouch Sharon
bonsaikathy: that's not good
Donna_in_NV: the fan on the convection oven would do that, wouldn't it?
Unless you cover the piece with a tent of foil
Kat Indpls IN: for those that have convection oven, word of warning
sorry
Sharon, i put a glass bowl over the top of my pendant to keep the
powder
from flying around
countrylady100ca: Yeah Have you see Kathy's DEMO Advister down bottom
about
foil
Electron Forge: Sonya, my dad was a big CB'er in the 70's I still have
all
his old equip in my attic. Some of the lingo seeped in I guess.
bonsaikathy: good point Kat
Alix: Sharon ... you have tabletop convection unit?
Shargoose=Sharon V in TN: Yes
Shargoose=Sharon V in TN: Phew
Shargoose=Sharon V in TN: All's OK
countrylady100ca: My father, Uncles and etc. Used CB's too. I forgot
the
codes
Shargoose=Sharon V in TN: But I have half the UTEE on my piece now!!
Kat Indpls IN: sry Sharon should have warned you earlier, i learned
that a
long time ago because of my flying tornado mini vegtables
Shargoose=Sharon V in TN: Ya
Shargoose=Sharon V in TN: I shold have thought of it
Shargoose=Sharon V in TN: Just too much in a hurry
Missy~VA: how long do we bake now?
Donna_in_NV: I would have forgotten that too
Kat Indpls IN: i use the clear pyrex dishes and turn them over the
project
that way i can see whats happening still
MountainMaMaDuke: flying tornado mini vegetables ????
Shargoose=Sharon V in TN: I put the tile and peice in a pan and covered
with
foil
Kat Indpls IN: i bake this for 25-30 mins. do not open oven until utee
is
clear
Electron Forge: thanks mama duke. I was thinking the same thing LOL
Kat Indpls IN: foil should work
Lisa in Maine: what happens if you do, Kat?
Kat Indpls IN: i juse like the pyrex because i can see through
helen050959 left the room
Lisa in Maine: some of us like to "peek" at are bakign things! LOL
Shargoose=Sharon V in TN: Won't be able to seeif it's clear but have
timer
set for 40 Mins
Electron Forge: so is that what they mean by Helen gone?
Missy~VA: at what temp kat?
countrylady100ca: But you are right kathy about see through
Kat Indpls IN: just have to reheat till your utee gets hot again
Kat Indpls IN: 275
Shargoose=Sharon V in TN: Kat
Shargoose=Sharon V in TN: What about the scapes left over
Kat Indpls IN: yes
Shargoose=Sharon V in TN: The clay
countrylady100ca: Did I miss about Helen]
anniek556: lol helen left messenger awhile ago, but her name was still
in
here
Shargoose=Sharon V in TN: Can you roll into beads?
Missy~VA: brb
Donna_in_NV: OK, putting fimo glaze on piece she did last week
Kat Indpls IN: oh make beads, use as backing for another pendant
bonsaikathy: good question Sharon
Kat Indpls IN: make a smaller pendant or use for inlay tons of things
Kat Indpls IN: yes gentlly
hlynn1975: back
Shargoose=Sharon V in TN: Thanks
Marlea in PA: wb heather
Shargoose=Sharon V in TN: Now for those foils that don't stick real
good
Shargoose=Sharon V in TN: Could you bake a piece
Kat Indpls IN: the more pressure the more fracturing of the foil
Shargoose=Sharon V in TN: Coat with glue and apply foils then bake
again?
hlynn1975: the Mona Lisa brand glue bakes well
Shargoose=Sharon V in TN: I have baked glued items so I think it will
work
Kat Indpls IN: i use the glue pen or the sticker sheets i have for the
foil
that is hart to adhere what i did with the moon
Shargoose=Sharon V in TN: Will have to try that
hlynn1975: I know not all glues will survive baking.
Kat Indpls IN: here is one that is not very easy to transfer
Missy~VA: can u add the flake stuff to the UTEE?
Donna_in_NV: those are beautiful foils, Kat
Marlea in PA: that would probably look cool Missy
bonsaikathy: are those all part of that same pack of foils from the
link
that was sent earlier
bonsaikathy: qvc
Kat Indpls IN: i put the sticker on the sheet first
Donna_in_NV: yes, can get some interesting effects with flakes in UTEE
but
would probably spoil the dichroic effect
Kat Indpls IN: i'll do a butterfly
Missy~VA: ty queen donna...lmao
Missy~VA: she is full of all the answers today! i cant even remember
what we
did 2 mis ago
Missy~VA: lol
Marlea in PA: lol
bonsaikathy:
Missy~VA: mins even
Missy~VA: see cant even type
Marlea in PA: oh pretty
Missy~VA: pretty kat!!!!!
Electron Forge: I missed the beginning of the first piece, can I get a
quick
rundown of the sticker part?
bernie: beauuuuuutiful kat
Donna_in_NV: what kind of sticker Kat - 2 sided glue?
Kat Indpls IN: just remember you have to do the holligraphic foils this
way
first then the other foils around it
Shargoose=Sharon V in TN: Is the sticker sticky on both sides?
Missy~VA: donna i was jokin with ya hun! hope i didnt make ya mad
Kat Indpls IN: they are sticker sheets that came with the qvc kits
Donna_in_NV: not at all missy - I kind of liked it
Shargoose=Sharon V in TN: So like two sided tape?
Donna_in_NV: cool, glad to know come with kit - I'm ordering a couple
this
coming week
Kat Indpls IN: all you really want is the sticky part two sided should
work
Electron Forge: ok thx
Missy~VA: im goin to order a kit too
connie_flying: QVC was out of stck a few days ago
Missy~VA: i really like this!
Shargoose=Sharon V in TN: Oh, so you put the unsticky side on the clay
Kat Indpls IN: enough stick to grab that holigraphic foil of the vellum
connie_flying: stock
Shargoose=Sharon V in TN: and the sticky side up?
Alix: Donna and Kat make a good team.
Kat Indpls IN: nope sticky both ways
Donna_in_NV: set of 4 sets only $33
Shargoose=Sharon V in TN: I am confused Kat
bonsaikathy: I know, great price
Kat Indpls IN: let me show you again
Shargoose=Sharon V in TN: Thanks
Electron Forge: stickey to foil, backing to clay?
Donna_in_NV: do you put the sticker on the clay, then put the foil on
the
sticker or vice versa?
Kat Indpls IN: these are sheets that have a cutout in them dragonfly
and
butterfly no paper is stuck to the sticky its releasable from both
sides
Kat Indpls IN: foil first
Missy~VA: kat ur doin a dragonfly???
Donna_in_NV: neat, very useful for all kinds of things - so a die cut
from 2
sided tape would work too
Missy~VA: omg
Kat Indpls IN: its the part thats being stubborn
Alix: I am not confused. i am totally lost.
MountainMaMaDuke: LOL
Kat Indpls IN: okay i just transfered the sticky to the foil sheet now
transfer that to the clay and rub
Missy~VA: i want some of the dragonfly stickers
Missy~VA: hope they have a few kits soon
Missy~VA: will do a dragonfly in honor my jess
Alix: Four sets of what is $33?
Shargoose=Sharon V in TN: That's sweet Missy
Shargoose=Sharon V in TN: I got it!!
Missy~VA: she would've been 15 this tues
Missy~VA: on the first of feb
Missy~VA: ohhhhhhhhhhhh
Missy~VA: i LOVE it kat
Missy~VA: ty for choosing the dragonfly!
Electron Forge: so the "sticker" is now imbetween the clay and foil and
is
part of the piece now?
Donna_in_NV: each kit has all kinds of goodies - 16 sticker sheets, 60
foil
sheets, etc from QVC - foil magic 79 piece foiling activity kit
Shargoose=Sharon V in TN: can we take a short break Kat?
Donna_in_NV: Doug, I think that's right - sticker part of piece
Missy~VA: do u have some donna?
Missy~VA: i can still see the dragonfly
Kat Indpls IN: sure ciggy break for me
Missy~VA: ty for usin the dragonfly kat
Electron Forge: ok, I think I'm on it.
Shargoose=Sharon V in TN: Thanks Kat
Donna_in_NV: not yet - just looking at piece I printed out from QVC -
gonna
order this week
Shargoose=Sharon V in TN: gotta goooooo
Electron Forge: LOL
Donna_in_NV: Those are so pretty!
Lisa in Maine: good thing someone's logging this and doing pix!!
Kat Indpls IN: i think the holigraphic really makes it pop also
Missy~VA: ty for usin the dragonfly kat
Missy~VA: means alot
Kat Indpls IN: yw
Missy~VA: im in tears here
Electron Forge: one of those tree frogs with the long toes would look
great
in that funkey foil!
MountainMaMaDuke: KAT did you just add the foils after doing the
butterfly
and dragonfly first?
Missy~VA: jessies bday is tues
Kat Indpls IN: missy what stickers did i send you can't remember
countrylady100ca: Okay I found QVC It is Item Number T22117
Marlea in PA: perfect timing for a dragonfly to show up then, right
hon'?
Missy~VA: hearts
Missy~VA: and moons i think
Missy~VA: yep mar sure is!
Kat Indpls IN: do the stickers first then regular foils after
connie_flying: Does it still say "Out of Stock?"
Donna_in_NV: I didn't think to give item # when I gave the link.
Thanks,
Sonya
Missy~VA: brb gotta get some tissue
sistersay2002 joined the room
Kat Indpls IN: Hi Faith
countrylady100ca: Not what I give item# but there is three kits One of
them
are waiting list
Electron Forge: so you can't get this stuff anywhere else or is this
just a
good deal?
bernie: hi ya Faith (love your addy sistersay)
countrylady100ca: Item Number T22117 Set of 4 Foil Magic 79 Piece
Foiling
Activity Kits
Alix: Sonya here? Sonya from Alberta?
Kat Indpls IN: i bought the quantity one makes more sense
Kat Indpls IN: great deal for foils and the other stuff
countrylady100ca: Yes I am Sonya from Alberta.. What sup
Kat Indpls IN: foils usually around 5.00 for one sheet
connie_flying: Yes you can get it at other places but this is a good
bargain
price
bonsaikathy: yes that is an awesome price
Kat Indpls IN: little bit smaller then 81/2 x 11 its an awesome price
bonsaikathy: and Kat I want you to know how much I appreciate the demo
too
Alix: I need a few minutes' worth pf advice when demo is over, OK?
Electron Forge: how about at Hobby Lobby or Micheals?
bonsaikathy: this has been great
Kat Indpls IN: np
sistersay2002: Hi - babasbunja - just got in the chat. Looking cool,
Kat!
krafteame: so you put the foil that is hard tomake stick on one side
and
then the other side to the clay right? the other piece should be baking
at
what temp?
Kat Indpls IN: sure
countrylady100ca: Another kit is Item Number T21646 79 Piece Foil Magic
Foiling Kit Waitlist Only Retail Value $19.95 QVC Price $9.95 Shipping
and
Handling $4.47
countrylady100ca: Okay Alix
Kat Indpls IN: bake at 275 for 25-30 mins. i let it cool down in the
oven
Shargoose=Sharon V in TN: K I'm back
bonsaikathy: can't wait to see it finished
bonsaikathy: it's really beautiful
sistersay2002: Sorry - gotta go make dinner. Great first demo, Kat.
Sorry I
almost forgot about it!
Shargoose=Sharon V in TN: rubbed it and than heated again
Electron Forge: Yes Lisa in Maine
krafteame: how far did you hold the heat gun fromthe clay?
Lynn..Lvmypolymerclay: by sister'
Shargoose=Sharon V in TN:
about 3 inches
Kat Indpls IN: hang on got to grab a battery for my postal scale
Shargoose=Sharon V in TN: maybe less
Kat Indpls IN: think it will be 3.85
Lisa in Maine: Oh Doug .... No, don't do that! I'm very very
appreciative, honest ... but don't be doing that, hon!!
Kat Indpls IN: for priority mailing
connie_flying: Thanks for the info Sharon, I'll try that
sistersay2002: bye, y'all
Donna_in_NV: don't sweat the weight - I'll give you the new priority
mail price for whatever you can fit in the pkg
Vicki in NH: bye
MountainMaMaDuke: Don't worry Lisa, I live alone, and I am still
confused with all this conversation
Shargoose=Sharon V in TN: The glue did not work!!
Lisa in Maine: I'll pick one up when I can ... not a big deal,
honestly!!!
Alix: Just got my late Bday & Xmas today ... two ostrich eggsand two
emu eggs
Shargoose=Sharon V in TN: Pulled up the clay on the foil sheet
Electron Forge: Let's just say I did ok at the pool hall last night
and it's a way to give back to this group
Kat Indpls IN: lisa send me an email please
Shargoose=Sharon V in TN: Kat, I have pics
hlynn1975: are you going to hatch them or cook them Alix?
Shargoose=Sharon V in TN: Are you going to do any more demo?
krafteame: which lisa ?
Donna_in_NV: she'll craft with them, Lynn
countrylady100ca left the room
Kat Indpls IN: SURE
Lisa in Maine: LOL Doug ... good for you ... at the pool hall ...
you shark, you!
countrylady100ca joined the room
hlynn1975: ah, very cool then
Kat Indpls IN: hang on
Lynn..Lvmypolymerclay: I getting ready to do a few eggs for a swap
Electron Forge: somtimes I get sharked too though!
Lynn..Lvmypolymerclay: never done that before
countrylady100ca: Sorry Pretty soon I have to uninstall yahoo
Messenger and reinstall
Kat Indpls IN: okay postal scale went phttttt
Kat Indpls IN: but should only be 3.85 for shipping
Lynn..Lvmypolymerclay: I hate when that happes
Kat Indpls IN: hopefully just the dang battery is doing it
Marlea in PA: lol
Lynn..Lvmypolymerclay: and the kit is 9.95?
Kat Indpls IN: but dang that 9 volt still has a zap to it
Alix: They're already blown ... I'll carve . with some clay
application probably ,,, buyt first plan to use ostrich eggs as
molding positives for hanging planter molds
krafteame: which lisa do you want to email you Kat?
Donna_in_NV: Priority mail has a deal now where you can mail any
weight that will fit in the one price pk for $3.85 or 3.95 and it
will take 4 or 5 1 lb block of Premo
Missy~VA: <~~wants chocolate
Kat Indpls IN: the lisa that is not getting a kit LOL
Lynn..Lvmypolymerclay: no missy
krafteame: MMM chocolate!
Missy~VA: what is that in the middle of the screen kat?
Vicki in NH: I have some M&M's Missy
Missy~VA: whatever it is has ur name on it doesnt it?
Kat Indpls IN: Lynn, Donna and Vicki were the winners on the kits
Missy~VA: mmmmmm love them vicki!
Donna_in_NV: OK, Lynn, Vicki and I are getting the kits - so Lisa
not in ME
Alix: Yippee!!! Cheap book mailing is back!!!
Marlea in PA: nooo. not emmy ems
Missy~VA: lol
Vicki in NH: Shirek ones even lol
Electron Forge: OK we tried lisa in Maine. I'm a little slow from
being up all night! Sorry
Missy~VA: i have some peanut mms here
Missy~VA: have to get them
connie_flying: Foiling over the dried glue now
Missy~VA: ...hehehehe
Lynn..Lvmypolymerclay: no missy
Marlea in PA: the green and brown shrek ones? you guys are killin' me
Donna_in_NV: Lisa in Me will get some from her MIL - Vicki
Electron Forge: cool
Vicki in NH: Or Lisa in Maine will get it for her birthday
Donna_in_NV: if not, I'll send her some of mine when I get them
MountainMaMaDuke: If Lisa is a good girl !!
Missy~VA: kat i have my piece coolin in my T.O.
Lynn..Lvmypolymerclay: I thought i read you could put clay on those
m&m tubes
MountainMaMaDuke: LOL
Electron Forge: Now everyone is happy
Marlea in PA: cute Kat
Missy~VA: told ya it had ur name on it
Missy~VA: lol
Donna_in_NV: That's kool, Kat - that's the foil over the glue pen
Marlea in PA: you've got eagle eys Missy, lol
Missy~VA: thats what eddie tells me
Lisa in Maine: alright ... I'm trying to catch up here ...
Missy~VA: but cant hear a lick
Missy~VA: lol
Kat Indpls IN: brb
Marlea in PA: lol
Kat Indpls IN: hot hot hot
Lisa in Maine: Doug ... thank you VERY much for the offer ...
REALLY!!!
Lisa in Maine: <--- is cool with not getting "on the list"! LOL
Electron Forge: NP just trying to pay some of the gifts I have
recieved forward
Electron Forge: LOL
Lisa in Maine: I really do appreciate it, Doug ... that is just so
sweet of you!
Shargoose=Sharon V in TN: OK it's feeding time at the zoo here
Shargoose=Sharon V in TN: So if someone wats to do screen shots, I'd
be obliged
Electron Forge: are you trying to make the ONLY guy in here blush?
stop it
Vicki in NH: Doug, Lisa know what I get she gets, we share. When
she's a good girl that is lol
Electron Forge: LOL
anniek556: got to go folks, catch you later maybe
Lisa in Maine: LOL Sharon ... I *think* we're having spaghetti for
dinner ... I believe that was part of the conversation I wasn't
paying attention to over at this house!! LOL
countrylady100ca:
Electron Forge: bye Annie
anniek556 left the room
Vicki in NH: You always have pasta
Shargoose=Sharon V in TN: You are on your own now
Lisa in Maine: <--- is ALWAYS a good girl
Shargoose=Sharon V in TN: Please get some shots for me??!!
Missy~VA: i dont know how
Lisa in Maine: no kidding, mother ... guess I shoulda been paying
attention to what Joe was saying, huh??
Donna_in_NV: I hope someone else knows how - I don't yet
countrylady100ca: Kahty Is your finger okay. little bit burn
Shargoose=Sharon V in TN: Hold on
Missy~VA: beautiful!!!!
countrylady100ca: Very Nice and different one of kind wink
Electron Forge: how often do you want them Sharon?
Marlea in PA: I'm sorry donna- i did it before but computer ate
everything- i don't want to risk losing it all
Donna_in_NV: That is so pretty, Kat - how long does UTEE need to cool
Shargoose=Sharon V in TN: I'll see if Hubby will feed the critters
bonsaikathy: I'm afraid I can't get shots as I'll be having to leave
soo
Lisa in Maine: Oh Kat! That's gorgeous!
bonsaikathy: this has been great though
Missy~VA: lol
Kat Indpls IN: lets put it this way i ain't touching it yet
Alix: Back ... my cheesy chicken rice now toasted cheesy chicken rice
Missy~VA: good thinkin shar!
bonsaikathy: wow, awesome
Marlea in PA: comp. freeze then says file is corrupt when i try to
get screen shots
Missy~VA: ur leavin kathy?
Donna_in_NV: thanks, Vicki, now we can get together and Lisa won't
know we're talking about her
countrylady100ca: Possible virus Marlea
bonsaikathy: very soon I have to
Electron Forge: I'll get them while I'm here, how often do you want
them
Vicki in NH: true Donna
Kat Indpls IN: i figure if the clay is cool the utee is and the clay
is hot right now
Lisa in Maine: hey, hey, HEY you two!! cut that out!!
Marlea in PA: i hope not sonya
bonsaikathy: I've been here all day long and hubby needs the
computer to finish doing some stuff
Lisa in Maine: <--- is really an
Lisa in Maine: HONEST!! LOL
Donna_in_NV: whenever she shows something new on screen, Doug
Vicki in NH:
Marlea in PA: just says virtual memory is low, then freezes, then
when i try to open them later it says the files are corrupt
krafteame: I have an idea, for the sides couldnt you exstrude a
strip for the sides?
Electron Forge: got it. someone tell me where to send them later
Kat Indpls IN: okay anyone need to see anything else like maybe how
to finish the pendant off
Missy~VA: doug ur good....lol
Shargoose=Sharon V in TN: OK
Marlea in PA: nicely done doug
Kat Indpls IN: i do the sides this way so that no utee will flow out
the back
Donna_in_NV: usually they're put in Epson or something like that and
info e-mailed to group
Missy~VA: man i wanna take mine outta the TO
countrylady100ca: Me too Marlea but it did happened to me that why
we bought router as stronger firewall. sssss shoot bad virus before
come in my computer.
Lynn..Lvmypolymerclay: Hey Kathy...I"m glad to hear Takumi is doing
better and home now
Shargoose=Sharon V in TN: Hubby said he's feed the critters and will
put our food on warm
Missy~VA: can ???
Missy~VA: can i????
Shargoose=Sharon V in TN: So I can do screen shots
Shargoose=Sharon V in TN: but not for long
bonsaikathy: thanks Lynn, so are we
bonsaikathy: poor little thing
Electron Forge: Go eat already. I got the scrennshots
Lynn..Lvmypolymerclay: little ones bounce back so easily
Shargoose=Sharon V in TN: Doug!!
Shargoose=Sharon V in TN: Big hugs
Lisa in Maine: LOL Doug!
Shargoose=Sharon V in TN: Thanks
Electron Forge: luv ya
Shargoose=Sharon V in TN: I don't want to miss anything
bernie: he's such a cutie Kathy, we're all in love with him ya know,
he has several cyber grannies
Marlea in PA: i've got my windows firewall on, that's all i have
sonya...i don't have a clue when it comes to this thing
Electron Forge: I'll get plenty
countrylady100ca: Doug And Sharon not squeeze me as middle between
sharon and doug
Lynn..Lvmypolymerclay: can I be an older sister
Shargoose=Sharon V in TN:
Donna_in_NV: that's why we're all here today - don't want to miss out
Lisa in Maine: you're such a good guy, Doug!!
Shargoose=Sharon V in TN: Off to do critters
Missy~VA: hb shar
Shargoose=Sharon V in TN: Kat I'll leave cam on and group open but I
won't be here!!
Missy~VA: lynn u can be my older sister....LOL
Kat Indpls IN: ok thanks Sharon
Electron Forge: Doug sandwich for hugs, right on!
Lynn..Lvmypolymerclay: ok Missy : )
Lynn..Lvmypolymerclay: lol
Missy~VA: ur even in va lol
Jackie (ljcswartz) joined the room
Donna_in_NV: Kat, are those hypodermics
Missy~VA: for awhile that is
krafteame: what are o rings for?
Lynn..Lvmypolymerclay: for a bit longer
bonsaikathy: this has been great but really need to get going now
Missy~VA: what the dookies is that?
bonsaikathy: hugs to all
Lynn..Lvmypolymerclay: the people that made the offer want to close
Feb 28
Missy~VA: hugssssss kathy
Kat Indpls IN: drill bits
bernie: see ya Kathy
bonsaikathy: THANKS KAT
bonsaikathy: you did good
Donna_in_NV: buna cord and o rings for stringing pendant?
Missy~VA: ty
Lynn..Lvmypolymerclay: Bye Kathy
bonsaikathy left the room
Jackie: better late than never....I finally made it
Kat Indpls IN: yes
Missy~VA: hiya jackie
Jackie: hi
bernie: hody Jackie
Lynn..Lvmypolymerclay: Hi Jackie
Alix: How much too low, Lyyn ... % not $, I'm not snooping LOL
pennyi: can i ask an unrelated question to this demo but pertinent
to clay
Missy~VA: sure penny
Lynn..Lvmypolymerclay: that's a math question so I'd rather say
$...$35,000
Missy~VA: we can try and help ya
Donna_in_NV: of course, someone should be able to answer
Lynn..Lvmypolymerclay: don't make me do %
pennyi: what do you use the like rubber stamp sheets for
Missy~VA: ouch lynn thats alot of money
Missy~VA: texturing!
Missy~VA: lots of fun!
Lynn..Lvmypolymerclay: yep took us from one financial group to
another
Jackie: mokume Gane
Donna_in_NV: to texturize clay, to make impression in clay or all
kinds of things
pennyi: texturing how
Missy~VA: take black clay
Jackie: mica shift
krafteame: did you use rub N buff around the lip of the pndant Kat?
Missy~VA: moosh sheet into it
Donna_in_NV: some stamps have an all over design - press into clay -
makes texture
Missy~VA: or run thru pm
bernie: press them into clay
mommaclara2001: Leaving , now. Bye to all.
Missy~VA: then take some pearlex and rub over the top
Donna_in_NV: bye Clara - take care
MountainMaMaDuke: Bye Bye
Missy~VA: bye clara
Jackie: bye
mommaclara2001: You too Donna
bernie: bye momma
Vicki in NH: bye
Lynn..Lvmypolymerclay: bye clara
mommaclara2001 left the room
Electron Forge: dang missed her
Missy~VA: got it now penny?
Donna_in_NV: I saw Marie Segal use stamp to texturize vase in her
video Imitating Metal
Lynn..Lvmypolymerclay: hubby is running late at work so I dont have
to leave for a while woooohooo
Electron Forge: bye anyway Marlea if you read the Digest! LOL
pennyi: yeah but what so you use it for once you smoosh it on the
clay
krafteame: aroun the edge kat?
Donna_in_NV: to hide fingerprints among other things
Marlea in PA: eek- sorry- too many im's going i can't keep up
Donna_in_NV: are you drilling a hole for the cord, Kat?
Donna_in_NV: looks like it
Kat Indpls IN: foil pen for edges, drilling holes for buna
Lynn..Lvmypolymerclay: Hey Missy did you get any snow or just ice?
Missy~VA: just ice
Missy~VA: and its gone now!
Missy~VA: melted
Lynn..Lvmypolymerclay: really?
Missy~VA: i wanted snow
Lynn..Lvmypolymerclay: we got about 3-4 inches of snow
Marlea in PA: we got around an inch and a half of snow here
connie_flying: Penny -- you can wrap the patterned clay around a pen
or cut out a design for a pendant or make other things with it.
MountainMaMaDuke: Gee, If anyone wants snow....
Missy~VA: i want snow
Lynn..Lvmypolymerclay: hope it melts soon cause people can't get up
our driveway without 4 wheel drive
Missy~VA: was hopin to have some for jessies bday
Donna_in_NV: No thanks Mama - I've already had more than I ever
wanted
Alix: We got a little bit of snow here
Lisa in Maine: alrighty ... hubby's making dinner, so I better go
help! (sheesh - I've missed more of this demo than I've actually
SEEN)
MountainMaMaDuke: come to NH, although my son lives in MA and they
got 31 inches on Jan 23rd
Lynn..Lvmypolymerclay: I may just have to break out the sled one
more time before moving
Vicki in NH: we have enough here, I'll send some
Missy~VA: bye lisa
Electron Forge: Bye Lisa
Vicki in NH: Bye Lisa
bernie: see ya lisa
Lisa in Maine: Doug ... thanks for taking over with the pictures ...
I'm gonna NEED that to figure out what was happening!
Vicki in NH: have a nice din din
Marlea in PA: doug, did you want something earlier?
connie_flying: got plenty of snow here -- thinking about turning the
water hose on it to melt it away. LOL
Lisa in Maine: g'night all!
Alix: Lynn ... maybe that's why they bid so low LOL
Lynn..Lvmypolymerclay: bye Lisa
Donna_in_NV: Kat's feeding buna cord thru holes she drilled in
pendant
Lynn..Lvmypolymerclay: that could be LOL
Jackie: pretty Kat
kittekattz left the room
Lynn..Lvmypolymerclay: they would bid lower if they tried to come by
now LOL'
Donna_in_NV: bye Lisa
Electron Forge: no wrong name was saying a posthumos goodbye to
mommaclara and typed in Marlea by mistake, sorry
bernie: that's just beautiful
Donna_in_NV: Nice Kat - what were o-rings for?
Lynn..Lvmypolymerclay: someone actually wanted to come by to see if
they could build 4 more family homes on this lot....strange people
Lynn..Lvmypolymerclay: that's pretty
Electron Forge: Kat lift it up a bit please
Marlea in PA: lol, see? I'm memorable aren't i...lol
Electron Forge: thx
bernie: i've noticed that pendants are becoming more popular these
days
Donna_in_NV: Kat, what were o-rings for?
pennyi: my grandson loves the pendant kat
MountainMaMaDuke: KAT - did you just glue the buna cord ends inside
the pendant?
Donna_in_NV: Ok, they're at top of pendant where buna cord glued
into holes
Donna_in_NV: a nice finishing touch
Electron Forge: are the o rings glued down?
Kat Indpls IN: covers the glue that oozes out
bernie: looks most professional Kat
Kat Indpls IN: yep glue that oozed out keeps the o rings in place
bernie: finished off
Electron Forge: right on
MountainMaMaDuke: I couldn't figure out how she drilled two holes at
those angles and got the cord to go through the clay
bernie: those details make a difference
Donna_in_NV: I think pendants are more popular today than have been -
they were very popular when I was in hi school over 40 yrs ago
MountainMaMaDuke: VERY NICE KAT!
Donna_in_NV: That leaf is scrumptious Kat
bernie: yes Donna, that's what I have noticed too
Electron Forge: that's beautiful. got a great shot of it too!
Kat Indpls IN: foung that cutter in the wilton aisle today
Donna_in_NV: Can't you just see it on a russet colored sweater?
Alix: People here are starting to build really huge houses about 15-
25 feet apart
helen050959 joined the room
bernie: at the peoples' awards, so many were wearing pendants
Electron Forge: Helen Back
Electron Forge: LOL
helen050959: yes I am
Donna_in_NV: wb Helen
Electron Forge: Hi
Kat Indpls IN: this is another fastener i like they can wear as a
pin or a pendant
Donna_in_NV: I used to wear a lot of pendants with sweaters
helen050959: hi all
Electron Forge: oh come on Hell and back. This is A material here
folks..LOL OK I'm an idiot. sorry
Kat Indpls IN: now with this type of closure i would finish the back
off
Donna_in_NV: do you just glue it to the back?
bernie: me too donna, have a big collection of them upstairs, styles
always recycle themselves
connie_flying: where do you but those???
connie_flying: buy?
Donna_in_NV: see the back on that - that's texturizing clay with a
stamp
Donna_in_NV: just a nice feature for backs of pieces
Marlea in PA: lol- just saw it Doug..giggling
Electron Forge: LOL
Donna_in_NV: I see you put another piece of clay over the bar of the
pin part - nice finishing touch
Donna_in_NV: I'm with Connie, where do you buy those dual pin/pendant
Kat Indpls IN: tls down for the pin, two strips of textured clay and
my signature cane slice
Alix: Anyone want to see some shots of metal leaf painting on canvas?
Kat Indpls IN: i think i got these at rings n things
Donna_in_NV: is rings n things on line?
Kat Indpls IN: smooz carries them also, the one with the utee
Kat Indpls IN: yes
connie_flying: great! I just got their catalog
Donna_in_NV: good to know
Electron Forge: man, screenshots are a PITA! Didn't realize how hard
these mods were working even in here! Thanks guys
connie_flying: yes Donna
connie_flying: They have fast service and low prices
Donna_in_NV: smooz or rings n things?
connie_flying: rings & things
Donna_in_NV: that leaf is beautiful
Missy~VA: is that where u got the pin backs?
Donna_in_NV: OK I'll send for cat
Missy~VA: the ones that will make a pin or pendent?
connie_flying: it's big and you'll love it
Donna_in_NV: brb - biology strikes
Alix: What your signature cane, Kat?
connie_flying: yes missy
Missy~VA: ty connie
connie_flying: yw
Marlea in PA: cool, i love the fire mt. gems catalog..nothing like a
big ol
Marlea in PA: ' catalog to go through
pennyi: i love that catalog
connie_flying: it's almost that big
pennyi: i belong to a group that does bulk buys from fire mountain
Donna_in_NV: I love catalogs - have fire mountains - it's great
connie_flying: I have that too
Alix: Your sign? I can't quite see the shape
MountainMaMaDuke: It probably says something like Kg
Donna_in_NV: If you bake the pin/pendant thingie on afterwards, how
do you keep level so UTEE doesn't run out when rebake
Kat Indpls IN: KLY is my signature from before i was married all
combined to form my artist signature cane
Electron Forge: I really like that piece Kat!
MountainMaMaDuke: OOps!
Missy~VA: good question donna!
connie_flying: Donna, it's already solid
Kat Indpls IN: Donna i usually bake the whole impressed backing
(thin) cut to shape and clue onto pendant
Marlea in PA: so it stays solid?
Kat Indpls IN: clue=glue
Kat Indpls IN: no will reliquify if heated
Tammy: well I have to go, and put the baby down for a nap
Donna_in_NV: but when rebake UTEE melts again - so you do backing of
whole piece separately
Kat Indpls IN: backing is thin maybe number 5 impressed sheet glued
onto back
Electron Forge: Bye Tammy
Alix: Neat ... I'm doing a Celtic Trinity Knot (trefoil) for mine
connie_flying: oh oopsie on me -- thought it would stay solid
Tammy: talk to all later
bernie: bye tammy
Donna_in_NV: bye Tammy take care of yourself
MountainMaMaDuke: bye bye
Vicki in NH: Bye Tammy
connie_flying: bye Tammy
tily072096 left the room
MountainMaMaDuke: I am going to get going myself, time to restock
the woodstove and make something to eat. THANK YOU KAT
Donna_in_NV: I want to see yours when done Alix, I love celtic knots
Electron Forge: Bye MaMa Duke
Donna_in_NV: by MaMaDuke- stay warm
Vicki in NH: Bye MaMA Duke
bernie: bye Ms. Duke
MountainMaMaDuke: See Ya
pdduke2003 left the room
Marlea in PA: anyone know what temp the utee melts at? If i
accidentally left something made with it in a hot car would it get
gooey?
Esther_UK: been off looking after baby. going for real now.
Electron Forge: didn't someone say 275? don't quote me
Donna_in_NV: Not unless car gets over 200 degree, I think - have to
check that for you
Kat Indpls IN: takes awhile to get gooey, about 270 degrees
connie_flying: bye Esther
Esther_UK: nite all
Vicki in NH: Bye Esther
Marlea in PA: night esther
bernie: night Esther
Alix: Very simple shape, I will have to use it for mold inserts ..
The math to make it was hell on wheels, tho LOLOL
Kat Indpls IN: lol
Donna_in_NV: I do know heat guns too hot for hair dryer
Kat Indpls IN: car would melt also
esther_reeves left the room
Kat Indpls IN: at least some of the plastic in it
Marlea in PA: ok, shouldn't be a problem then...
Kat Indpls IN: okay any more questions
Marlea in PA: hope you didn't find that out the hard way Donna
Donna_in_NV: one of my grandsons' friends used my heat gun as hair
dryer, so yeah -- at least he didn't get burn blisters!!
Electron Forge: made that mistake as a joke once. Once
Vicki in NH: Did he have any hair left?
Donna_in_NV: one more question, Kat
Alix: Oh BTW ... The Hallmark site has a really neat Harley miniture
on after Xmas sale
connie_flying: If we just used clear embossing powder would it melt
right in the oven?
Donna_in_NV: yes, Connie it would
Marlea in PA: oh my
connie_flying: ok I have that but not UTEE
Donna_in_NV: that's what I'm going to do since I have reg embossing
powder
Electron Forge: earlier someone said to use a thicker layer Connie
connie_flying: this will be fun Donna
Donna_in_NV: ok, Kat, one more question -- can I buy some of your
talent, pls?
Electron Forge: might read the digest to make sure
connie_flying: ok Doug
bernie: only one question Kat, will you keep on doing demos for us?
I love watching you work!
helen050959 left the room
connie_flying: I saw that above somewhere
Alix: I hope you used his dry hair as a heat gun polisher
Marlea in PA: lol donna
Electron Forge: Helen gone.
Electron Forge: I love that bit!
Donna_in_NV: I'm the one who said would take more - only because
finer powder so need more to fill the area
Electron Forge: fair enough
sistersay2002 left the room
Kat Indpls IN: yep i want to start a basic caning class so i will
setup more demo's in the near future
connie_flying: ahhh now I understand LOL
bernie: wonderful
Electron Forge: Are we done on demo?
Vicki in NH: thank you Kat
Donna_in_NV: thank you, Kat - I know I'm interested in learning more
caning
bernie: thanks Kat, see ya on the flipside
Jackie: nice to "see" you all today... Thanks, Kat
pennyi: i am interested in canes too
Alix: Good news about caning
Kat Indpls IN: Demo for cam is over any questions i'll answer them
pennyi: thanks kat
Marlea in PA: thanks Kat- wonderful demo
Donna_in_NV: Kat, want me to send the log?
connie_flying: thanks for the demo Kat. I'm eager to see any demos
you do for us.
Electron Forge: I would like to see a pic of that greay one with the
black lines comming down it later when done! Looks great
Missy~VA: ty kat
Electron Forge: Thanks for the Demo
pennyi@ameritech.net left the room
Kat Indpls IN: yes please send the log
Jackie: bye all.... great visit
ljcswartz left the room
Missy~VA: mine came out good kat!
Electron Forge: I have a question for a mod
Vicki in NH: bye
Kat Indpls IN: i will set up a demo probably not next week but the
following one
Kat Indpls IN: like to skip a week
Alix: Bye all ... going to see if i can recover a few of the lost
brain cells
alixnc left the room
Kat Indpls IN: oh that bead
connie_flying: great we'll all be here I'm sure
Electron Forge: yeah it's great
Donna_in_NV: Kat, mine only goes up to where I said I have paypal
Kat Indpls IN: well hang on i'll save the whole thing
countrylady100ca left the room
Missy~VA: u ahve to save it a lil at a time
Donna_in_NV: we should have been sending as we went along, I think
Missy~VA: or u lose some
Electron Forge: do I crop the pics before I load them or send them
with the log attached?
Missy~VA: ahve-have
Marlea in PA: oh that's right, you lose the earliest parts
Donna_in_NV: I sure did -- darn it
Missy~VA: thats y nj goes in and out
krafteame: thank you Kat
Kat Indpls IN: thats okay as long as we have the screen shots i can
do a tut from those
Vicki in NH: I have from where I came in about 4:30 till now do you
want that
Electron Forge: she knows all the angles
Missy~VA: kewl vicki!
Electron Forge: Do you want the shots with or without the chat
window cropped out?
Donna_in_NV: Vicki is Lisa's
MIL - she'll share with Lisa - you're so
nice, Dough
Donna_in_NV: Doug I mean
Shargoose=Sharon V in TN: OK,
Lisa in Maine: you're not talking about me, are you Doug?
Alix: Doug ... it's she LOL
Electron Forge: I'm not sure if I got it or not..
Shargoose=Sharon V in TN: The heat gun transferred the holo foil better
Shargoose=Sharon V in TN: Just heated for a second or two
Lisa in Maine: sheesh ... I'm trying to follow this conversation AND my
husband keeps talkign to me so I'm all confoozled!
sistersay2002: Sorry - gotta go make dinner. Great first demo, Kat.
Sorry I almost forgot about it!
Shargoose=Sharon V in TN: rubbed it and than heated again
Electron Forge: Yes Lisa in Maine
krafteame: how far did you hold the heat gun fromthe clay?
Lynn..Lvmypolymerclay: by sister'
Kat Indpls IN: hang on got to grab a battery for my postal scale
Shargoose=Sharon V in TN: about 3 inches
Shargoose=Sharon V in TN: maybe less
Kat Indpls IN: think it will be 3.85
Lisa in Maine: Oh Doug .... No, don't do that! I'm very very
appreciative, honest ... but don't be doing that, hon!!
Kat Indpls IN: for priority mailing
connie_flying: Thanks for the info Sharon, I'll try that
sistersay2002: bye, y'all
Donna_in_NV: don't sweat the weight - I'll give you the new priority
mail price for whatever you can fit in the pkg
Kat Indpls IN: lisa send me an email please
Vicki in NH: bye
MountainMaMaDuke: Don't worry Lisa, I live alone, and I am still
confused with all this conversation
Shargoose=Sharon V in TN: The glue did not work!!
Lisa in Maine: I'll pick one up when I can ... not a big deal,
honestly!!!
Alix: Just got my late Bday & Xmas today ... two ostrich eggsand two
emu eggs
Shargoose=Sharon V in TN: Pulled up the clay on the foil sheet
Electron Forge: Let's just say I did ok at the pool hall last night and
it's a way to give back to this group
Shargoose=Sharon V in TN: Kat, I have pics
hlynn1975: are you going to hatch them or cook them Alix?
Shargoose=Sharon V in TN: Are you going to do any more demo?
krafteame: which lisa ?
Donna_in_NV: she'll craft with them, Lynn
countrylady100ca left the room
Kat Indpls IN: SURE
Lisa in Maine: LOL Doug ... good for you ... at the pool hall ... you
shark, you!
countrylady100ca joined the room
Kat Indpls IN: hang on
hlynn1975: ah, very cool then
Lynn..Lvmypolymerclay: I getting ready to do a few eggs for a swap
Electron Forge: somtimes I get sharked too though!
Lynn..Lvmypolymerclay: never done that before
countrylady100ca: Sorry Pretty soon I have to uninstall yahoo Messenger
and reinstall
Kat Indpls IN: okay postal scale went phttttt
Kat Indpls IN: but should only be 3.85 for shipping
Lynn..Lvmypolymerclay: I hate when that happes
Kat Indpls IN: hopefully just the dang battery is doing it
Marlea in PA: lol
Kat Indpls IN: but dang that 9 volt still has a zap to it
Lynn..Lvmypolymerclay: and the kit is 9.95?
Alix: They're already blown ... I'll carve . with some clay application
probably ,,, buyt first plan to use ostrich eggs as molding positives
for hanging planter molds
krafteame: which lisa do you want to email you Kat?
Kat Indpls IN: the lisa that is not getting a kit LOL
Donna_in_NV: Priority mail has a deal now where you can mail any weight
that will fit in the one price pk for $3.85 or 3.95 and it will take 4
or 5 1 lb block of Premo
Missy~VA: <~~wants chocolate
Lynn..Lvmypolymerclay: no missy
krafteame: MMM chocolate!
Missy~VA: what is that in the middle of the screen kat?
Vicki in NH: I have some M&M's Missy
Kat Indpls IN: Lynn, Donna and Vicki were the winners on the kits
Missy~VA: whatever it is has ur name on it doesnt it?
Missy~VA: mmmmmm love them vicki!
Alix: Yippee!!! Cheap book mailing is back!!!
Donna_in_NV: OK, Lynn, Vicki and I are getting the kits - so Lisa not
in ME
Marlea in PA: nooo. not emmy ems
Missy~VA: lol
Vicki in NH: Shirek ones even lol
Electron Forge: OK we tried lisa in Maine. I'm a little slow from being
up all night! Sorry
Missy~VA: i have some peanut mms here
Missy~VA: have to get them
connie_flying: Foiling over the dried glue now
Missy~VA: ...hehehehe
Lynn..Lvmypolymerclay: no missy
Marlea in PA: the green and brown shrek ones? you guys are killin' me
Donna_in_NV: Lisa in Me will get some from her MIL - Vicki
Electron Forge: cool
Vicki in NH: Or Lisa in Maine will get it for her birthday
Donna_in_NV: if not, I'll send her some of mine when I get them
MountainMaMaDuke: If Lisa is a good girl !!
Missy~VA: kat i have my piece coolin in my T.O.
Lynn..Lvmypolymerclay: I thought i read you could put clay on those m&m
tubes
MountainMaMaDuke: LOL
Electron Forge: Now everyone is happy
Marlea in PA: cute Kat
Missy~VA: told ya it had ur name on it
Missy~VA: lol
Donna_in_NV: That's kool, Kat - that's the foil over the glue pen
Marlea in PA: you've got eagle eys Missy, lol
Missy~VA: thats what eddie tells me
Lisa in Maine: alright ... I'm trying to catch up here ...
Missy~VA: but cant hear a lick
Missy~VA: lol
Kat Indpls IN: brb
Marlea in PA: lol
Kat Indpls IN: hot hot hot
Lisa in Maine: Doug ... thank you VERY much for the offer ... REALLY!!!
Lisa in Maine: <--- is cool with not getting "on the list"! LOL
Electron Forge: NP just trying to pay some of the gifts I have recieved
forward
Electron Forge: LOL
Lisa in Maine: I really do appreciate it, Doug ... that is just so
sweet of you!
Shargoose=Sharon V in TN: OK it's feeding time at the zoo here
Shargoose=Sharon V in TN: So if someone wats to do screen shots, I'd be
obliged
Electron Forge: are you trying to make the ONLY guy in here blush? stop
it
Vicki in NH: Doug, Lisa know what I get she gets, we share. When she's
a good girl that is lol
Electron Forge: LOL
anniek556: got to go folks, catch you later maybe
Lisa in Maine: LOL Sharon ... I *think* we're having spaghetti for
dinner ... I believe that was part of the conversation I wasn't paying
attention to over at this house!! LOL
countrylady100ca:
Electron Forge: bye Annie
anniek556 left the room
Vicki in NH: You always have pasta
Shargoose=Sharon V in TN: You are on your own now
Lisa in Maine: <--- is ALWAYS a good girl
Shargoose=Sharon V in TN: Please get some shots for me??!!
Missy~VA: i dont know how
Lisa in Maine: no kidding, mother ... guess I shoulda been paying
attention to what Joe was saying, huh??
Donna_in_NV: I hope someone else knows how - I don't yet
countrylady100ca: Kahty Is your finger okay. little bit burn
Shargoose=Sharon V in TN: Hold on
Missy~VA: beautiful!!!!
countrylady100ca: Very Nice and different one of kind wink
Electron Forge: how often do you want them Sharon?
Marlea in PA: I'm sorry donna- i did it before but computer ate
everything- i don't want to risk losing it all
Donna_in_NV: That is so pretty, Kat - how long does UTEE need to cool
Shargoose=Sharon V in TN: I'll see if Hubby will feed the critters
bonsaikathy: I'm afraid I can't get shots as I'll be having to leave
soo
Lisa in Maine: Oh Kat! That's gorgeous!
bonsaikathy: this has been great though
Missy~VA: lol
Kat Indpls IN: lets put it this way i ain't touching it yet
Alix: Back ... my cheesy chicken rice now toasted cheesy chicken rice
Missy~VA: good thinkin shar!
bonsaikathy: wow, awesome
Marlea in PA: comp. freeze then says file is corrupt when i try to get
screen shots
Missy~VA: ur leavin kathy?
Donna_in_NV: thanks, Vicki, now we can get together and Lisa won't know
we're talking about her
countrylady100ca: Possible virus Marlea
bonsaikathy: very soon I have to
Electron Forge: I'll get them while I'm here, how often do you want
them
Vicki in NH: true Donna
Kat Indpls IN: i figure if the clay is cool the utee is and the clay is
hot right now
Lisa in Maine: hey, hey, HEY you two!! cut that out!!
Marlea in PA: i hope not sonya
bonsaikathy: I've been here all day long and hubby needs the computer
to finish doing some stuff
Lisa in Maine: <--- is really an
Lisa in Maine: HONEST!! LOL
Donna_in_NV: whenever she shows something new on screen, Doug
Vicki in NH:
Marlea in PA: just says virtual memory is low, then freezes, then when
i try to open them later it says the files are corrupt
krafteame: I have an idea, for the sides couldnt you exstrude a strip
for the sides?
Electron Forge: got it. someone tell me where to send them later
Kat Indpls IN: okay anyone need to see anything else like maybe how to
finish the pendant off
Missy~VA: doug ur good....lol
Shargoose=Sharon V in TN: OK
Kat Indpls IN: i do the sides this way so that no utee will flow out
the back
Marlea in PA: nicely done doug
Donna_in_NV: usually they're put in Epson or something like that and
info e-mailed to group
Missy~VA: man i wanna take mine outta the TO
countrylady100ca: Me too Marlea but it did happened to me that why we
bought router as stronger firewall. sssss shoot bad virus before come in
my computer.
Lynn..Lvmypolymerclay: Hey Kathy...I"m glad to hear Takumi is doing
better and home now
Shargoose=Sharon V in TN: Hubby said he's feed the critters and will
put our food on warm
Missy~VA: can ???
Missy~VA: can i????
Shargoose=Sharon V in TN: So I can do screen shots
Shargoose=Sharon V in TN: but not for long
bonsaikathy: thanks Lynn, so are we
bonsaikathy: poor little thing
Electron Forge: Go eat already. I got the scrennshots
Lynn..Lvmypolymerclay: little ones bounce back so easily
Shargoose=Sharon V in TN: Doug!!
Shargoose=Sharon V in TN: Big hugs
Lisa in Maine: LOL Doug!
Shargoose=Sharon V in TN: Thanks
Electron Forge: luv ya
Shargoose=Sharon V in TN: I don't want to miss anything
bernie: he's such a cutie Kathy, we're all in love with him ya know, he
has several cyber grannies
Marlea in PA: i've got my windows firewall on, that's all i have
sonya...i don't have a clue when it comes to this thing
Electron Forge: I'll get plenty
countrylady100ca: Doug And Sharon not squeeze me as middle between
sharon and doug
Lynn..Lvmypolymerclay: can I be an older sister
Shargoose=Sharon V in TN:
Donna_in_NV: that's why we're all here today - don't want to miss out
Lisa in Maine: you're such a good guy, Doug!!
Shargoose=Sharon V in TN: Off to do critters
Missy~VA: hb shar
Shargoose=Sharon V in TN: Kat I'll leave cam on and group open but I
won't be here!!
Missy~VA: lynn u can be my older sister....LOL
Kat Indpls IN: ok thanks Sharon
Electron Forge: Doug sandwich for hugs, right on!
Lynn..Lvmypolymerclay: ok Missy : )
Lynn..Lvmypolymerclay: lol
Missy~VA: ur even in va lol
Jackie (ljcswartz) joined the room
Donna_in_NV: Kat, are those hypodermics
Missy~VA: for awhile that is
krafteame: what are o rings for?
Lynn..Lvmypolymerclay: for a bit longer
bonsaikathy: this has been great but really need to get going now
Missy~VA: what the dookies is that?
bonsaikathy: hugs to all
Lynn..Lvmypolymerclay: the people that made the offer want to close Feb
28
Missy~VA: hugssssss kathy
Kat Indpls IN: drill bits
bernie: see ya Kathy
bonsaikathy: THANKS KAT
bonsaikathy: you did good
Donna_in_NV: buna cord and o rings for stringing pendant?
Missy~VA: ty
Lynn..Lvmypolymerclay: Bye Kathy
bonsaikathy left the room
Jackie: better late than never....I finally made it
Kat Indpls IN: yes
Missy~VA: hiya jackie
Jackie: hi
bernie: hody Jackie
Lynn..Lvmypolymerclay: Hi Jackie
Alix: How much too low, Lyyn ... % not $, I'm not snooping LOL
pennyi: can i ask an unrelated question to this demo but pertinent to
clay
Missy~VA: sure penny
Lynn..Lvmypolymerclay: that's a math question so I'd rather say
$...$35,000
Missy~VA: we can try and help ya
Donna_in_NV: of course, someone should be able to answer
Lynn..Lvmypolymerclay: don't make me do %
pennyi: what do you use the like rubber stamp sheets for
Missy~VA: ouch lynn thats alot of money
Missy~VA: texturing!
Missy~VA: lots of fun!
Lynn..Lvmypolymerclay: yep took us from one financial group to another
Jackie: mokume Gane
Donna_in_NV: to texturize clay, to make impression in clay or all kinds
of things
pennyi: texturing how
Missy~VA: take black clay
Jackie: mica shift
krafteame: did you use rub N buff around the lip of the pndant Kat?
Missy~VA: moosh sheet into it
Donna_in_NV: some stamps have an all over design - press into clay -
makes texture
Missy~VA: or run thru pm
bernie: press them into clay
mommaclara2001: Leaving , now. Bye to all.
Missy~VA: then take some pearlex and rub over the top
Donna_in_NV: bye Clara - take care
MountainMaMaDuke: Bye Bye
Missy~VA: bye clara
Jackie: bye
mommaclara2001: You too Donna
bernie: bye momma
Vicki in NH: bye
Lynn..Lvmypolymerclay: bye clara
mommaclara2001 left the room
Electron Forge: dang missed her
Missy~VA: got it now penny?
Donna_in_NV: I saw Marie Segal use stamp to texturize vase in her video
Imitating Metal
Lynn..Lvmypolymerclay: hubby is running late at work so I dont have to
leave for a while woooohooo
Electron Forge: bye anyway Marlea if you read the Digest! LOL
pennyi: yeah but what so you use it for once you smoosh it on the clay
krafteame: aroun the edge kat?
Donna_in_NV: to hide fingerprints among other things
Marlea in PA: eek- sorry- too many im's going i can't keep up
Donna_in_NV: are you drilling a hole for the cord, Kat?
Donna_in_NV: looks like it
Kat Indpls IN: foil pen for edges, drilling holes for buna
Lynn..Lvmypolymerclay: Hey Missy did you get any snow or just ice?
Missy~VA: just ice
Missy~VA: and its gone now!
Missy~VA: melted
Lynn..Lvmypolymerclay: really?
Missy~VA: i wanted snow
Lynn..Lvmypolymerclay: we got about 3-4 inches of snow
Marlea in PA: we got around an inch and a half of snow here
connie_flying: Penny -- you can wrap the patterned clay around a pen or
cut out a design for a pendant or make other things with it.
MountainMaMaDuke: Gee, If anyone wants snow....
Missy~VA: i want snow
Lynn..Lvmypolymerclay: hope it melts soon cause people can't get up our
driveway without 4 wheel drive
Missy~VA: was hopin to have some for jessies bday
Donna_in_NV: No thanks Mama - I've already had more than I ever wanted
Alix: We got a little bit of snow here
Lisa in Maine: alrighty ... hubby's making dinner, so I better go help!
(sheesh - I've missed more of this demo than I've actually SEEN)
MountainMaMaDuke: come to NH, although my son lives in MA and they got
31 inches on Jan 23rd
Lynn..Lvmypolymerclay: I may just have to break out the sled one more
time before moving
Vicki in NH: we have enough here, I'll send some
Missy~VA: bye lisa
Electron Forge: Bye Lisa
Vicki in NH: Bye Lisa
bernie: see ya lisa
Lisa in Maine: Doug ... thanks for taking over with the pictures ...
I'm gonna NEED that to figure out what was happening!
Vicki in NH: have a nice din din
Marlea in PA: doug, did you want something earlier?
connie_flying: got plenty of snow here -- thinking about turning the
water hose on it to melt it away. LOL
Lisa in Maine: g'night all!
Alix: Lynn ... maybe that's why they bid so low LOL
Lynn..Lvmypolymerclay: bye Lisa
Donna_in_NV: Kat's feeding buna cord thru holes she drilled in pendant
Lynn..Lvmypolymerclay: that could be LOL
Jackie: pretty Kat
kittekattz left the room
Lynn..Lvmypolymerclay: they would bid lower if they tried to come by
now LOL'
Donna_in_NV: bye Lisa
Electron Forge: no wrong name was saying a posthumos goodbye to
mommaclara and typed in Marlea by mistake, sorry
bernie: that's just beautiful
Donna_in_NV: Nice Kat - what were o-rings for?
Lynn..Lvmypolymerclay: someone actually wanted to come by to see if
they could build 4 more family homes on this lot....strange people
Lynn..Lvmypolymerclay: that's pretty
Electron Forge: Kat lift it up a bit please
Marlea in PA: lol, see? I'm memorable aren't i...lol
Electron Forge: thx
bernie: i've noticed that pendants are becoming more popular these days
Donna_in_NV: Kat, what were o-rings for?
pennyi: my grandson loves the pendant kat
MountainMaMaDuke: KAT - did you just glue the buna cord ends inside the
pendant?
Donna_in_NV: Ok, they're at top of pendant where buna cord glued into
holes
Donna_in_NV: a nice finishing touch
Electron Forge: are the o rings glued down?
Kat Indpls IN: covers the glue that oozes out
bernie: looks most professional Kat
Kat Indpls IN: yep glue that oozed out keeps the o rings in place
bernie: finished off
Electron Forge: right on
MountainMaMaDuke: I couldn't figure out how she drilled two holes at
those angles and got the cord to go through the clay
bernie: those details make a difference
Donna_in_NV: I think pendants are more popular today than have been -
they were very popular when I was in hi school over 40 yrs ago
MountainMaMaDuke: VERY NICE KAT!
Donna_in_NV: That leaf is scrumptious Kat
bernie: yes Donna, that's what I have noticed too
Electron Forge: that's beautiful. got a great shot of it too!
Kat Indpls IN: foung that cutter in the wilton aisle today
Donna_in_NV: Can't you just see it on a russet colored sweater?
Alix: People here are starting to build really huge houses about 15- 25
feet apart
helen050959 joined the room
bernie: at the peoples' awards, so many were wearing pendants
Electron Forge: Helen Back
Electron Forge: LOL
helen050959: yes I am
Kat Indpls IN: this is another fastener i like they can wear as a pin
or a pendant
Donna_in_NV: wb Helen
Electron Forge: Hi
Donna_in_NV: I used to wear a lot of pendants with sweaters
helen050959: hi all
Electron Forge: oh come on Hell and back. This is A material here
folks..LOL OK I'm an idiot. sorry
Kat Indpls IN: now with this type of closure i would finish the back
off
Donna_in_NV: do you just glue it to the back?
bernie: me too donna, have a big collection of them upstairs, styles
always recycle themselves
connie_flying: where do you but those???
connie_flying: buy?
Donna_in_NV: see the back on that - that's texturizing clay with a
stamp
Donna_in_NV: just a nice feature for backs of pieces
Marlea in PA: lol- just saw it Doug..giggling
Electron Forge: LOL
Donna_in_NV: I see you put another piece of clay over the bar of the
pin part - nice finishing touch
Donna_in_NV: I'm with Connie, where do you buy those dual pin/pendant
Kat Indpls IN: tls down for the pin, two strips of textured clay and my
signature cane slice
Alix: Anyone want to see some shots of metal leaf painting on canvas?
Kat Indpls IN: i think i got these at rings n things
Donna_in_NV: is rings n things on line?
Kat Indpls IN: smooz carries them also, the one with the utee
Kat Indpls IN: yes
connie_flying: great! I just got their catalog
Electron Forge: man, screenshots are a PITA! Didn't realize how hard
these mods were working even in here! Thanks guys
Donna_in_NV: good to know
connie_flying: yes Donna
connie_flying: They have fast service and low prices
Donna_in_NV: smooz or rings n things?
connie_flying: rings & things
Donna_in_NV: that leaf is beautiful
Missy~VA: is that where u got the pin backs?
Donna_in_NV: OK I'll send for cat
Missy~VA: the ones that will make a pin or pendent?
connie_flying: it's big and you'll love it
Donna_in_NV: brb - biology strikes
Alix: What your signature cane, Kat?
connie_flying: yes missy
Missy~VA: ty connie
connie_flying: yw
Marlea in PA: cool, i love the fire mt. gems catalog..nothing like a
big ol
Marlea in PA: ' catalog to go through
pennyi: i love that catalog
connie_flying: it's almost that big
pennyi: i belong to a group that does bulk buys from fire mountain
Donna_in_NV: I love catalogs - have fire mountains - it's great
connie_flying: I have that too
Alix: Your sign? I can't quite see the shape
MountainMaMaDuke: It probably says something like Kg
Donna_in_NV: If you bake the pin/pendant thingie on afterwards, how do
you keep level so UTEE doesn't run out when rebake
Kat Indpls IN: KLY is my signature from before i was married all
combined to form my artist signature cane
Electron Forge: I really like that piece Kat!
MountainMaMaDuke: OOps!
Missy~VA: good question donna!
connie_flying: Donna, it's already solid
Kat Indpls IN: Donna i usually bake the whole impressed backing (thin)
cut to shape and clue onto pendant
Marlea in PA: so it stays solid?
Kat Indpls IN: clue=glue
Kat Indpls IN: no will reliquify if heated
Tammy: well I have to go, and put the baby down for a nap
Donna_in_NV: but when rebake UTEE melts again - so you do backing of
whole piece separately
Kat Indpls IN: backing is thin maybe number 5 impressed sheet glued
onto back
Electron Forge: Bye Tammy
Alix: Neat ... I'm doing a Celtic Trinity Knot (trefoil) for mine
connie_flying: oh oopsie on me -- thought it would stay solid
Tammy: talk to all later
bernie: bye tammy
Donna_in_NV: bye Tammy take care of yourself
MountainMaMaDuke: bye bye
Vicki in NH: Bye Tammy
connie_flying: bye Tammy
tily072096 left the room
MountainMaMaDuke: I am going to get going myself, time to restock the
woodstove and make something to eat. THANK YOU KAT
Donna_in_NV: I want to see yours when done Alix, I love celtic knots
Electron Forge: Bye MaMa Duke
Donna_in_NV: by MaMaDuke- stay warm
Vicki in NH: Bye MaMA Duke
bernie: bye Ms. Duke
MountainMaMaDuke: See Ya
pdduke2003 left the room
Marlea in PA: anyone know what temp the utee melts at? If i
accidentally left something made with it in a hot car would it get
gooey?
Esther_UK: been off looking after baby. going for real now.
Electron Forge: didn't someone say 275? don't quote me
Donna_in_NV: Not unless car gets over 200 degree, I think - have to
check that for you
Kat Indpls IN: takes awhile to get gooey, about 270 degrees
connie_flying: bye Esther
Kat Indpls IN: lol
Kat Indpls IN: car would melt also
Esther_UK: nite all
Vicki in NH: Bye Esther
Marlea in PA: night esther
Kat Indpls IN: at least some of the plastic in it
bernie: night Esther
Alix: Very simple shape, I will have to use it for mold inserts .. The
math to make it was hell on wheels, tho LOLOL
Donna_in_NV: I do know heat guns too hot for hair dryer
esther_reeves left the room
Kat Indpls IN: okay any more questions
Marlea in PA: ok, shouldn't be a problem then...
Marlea in PA: hope you didn't find that out the hard way Donna
Donna_in_NV: one of my grandsons' friends used my heat gun as hair
dryer, so yeah -- at least he didn't get burn blisters!!
Electron Forge: made that mistake as a joke once. Once
Vicki in NH: Did he have any hair left?
Donna_in_NV: one more question, Kat
Alix: Oh BTW ... The Hallmark site has a really neat Harley miniture on
after Xmas sale
connie_flying: If we just used clear embossing powder would it melt
right in the oven?
Donna_in_NV: yes, Connie it would
Marlea in PA: oh my
connie_flying: ok I have that but not UTEE
Donna_in_NV: that's what I'm going to do since I have reg embossing
powder
Electron Forge: earlier someone said to use a thicker layer Connie
connie_flying: this will be fun Donna
Donna_in_NV: ok, Kat, one more question -- can I buy some of your
talent, pls?
Electron Forge: might read the digest to make sure
connie_flying: ok Doug
bernie: only one question Kat, will you keep on doing demos for us? I
love watching you work!
helen050959 left the room
connie_flying: I saw that above somewhere
Alix: I hope you used his dry hair as a heat gun polisher
Marlea in PA: lol donna
Electron Forge: Helen gone.
Electron Forge: I love that bit!
Donna_in_NV: I'm the one who said would take more - only because finer
powder so need more to fill the area
Electron Forge: fair enough
sistersay2002 left the room
Kat Indpls IN: yep i want to start a basic caning class so i will setup
more demo's in the near future
connie_flying: ahhh now I understand LOL
bernie: wonderful
Electron Forge: Are we done on demo?
Vicki in NH: thank you Kat
Donna_in_NV: thank you, Kat - I know I'm interested in learning more
caning
bernie: thanks Kat, see ya on the flipside
Jackie: nice to "see" you all today... Thanks, Kat
pennyi: i am interested in canes too
Alix: Good news about caning
Kat Indpls IN: Demo for cam is over any questions i'll answer them
pennyi: thanks kat
Marlea in PA: thanks Kat- wonderful demo
Donna_in_NV: Kat, want me to send the log?
connie_flying: thanks for the demo Kat. I'm eager to see any demos you
do for us.
Kat Indpls IN: yes please send the log
Electron Forge: I would like to see a pic of that greay one with the
black lines comming down it later when done! Looks great
Missy~VA: ty kat
Electron Forge: Thanks for the Demo
pennyi@ameritech.net<mailto:pennyi@ameritech.net>
left the room
Kat Indpls IN: i will set up a demo probably not next week but the
following one
Kat Indpls IN: like to skip a week
Jackie: bye all.... great visit
ljcswartz left the room
Missy~VA: mine came out good kat!
Electron Forge: I have a question for a mod
Vicki in NH: bye
Alix: Bye all ... going to see if i can recover a few of the lost brain
cells
alixnc left the room
Kat Indpls IN: oh that bead
connie_flying: great we'll all be here I'm sure
Electron Forge: yeah it's great
Donna_in_NV: Kat, mine only goes up to where I said I have paypal
Kat Indpls IN: well hang on i'll save the whole thing
countrylady100ca left the room
Missy~VA: u ahve to save it a lil at a time
Donna_in_NV: we should have been sending as we went along, I think
Missy~VA: or u lose some
Kat Indianapolis, IN
Member NPCG, Indianapolis Poly Clay Guild
Kat's Creations Plus
City-o-Clay Moderator
City Beaders Moderator
|
